4-post lift alignment lifts with integrated auxiliary lift 5,0 T, platform mength 5780 mm
As the QUADRA552LA, the QUADRA558LA also features a perfect finish. Hoses and wires from command unit to the runways, are routed into a plastic articulated chain providing also better reliability.
The QUADRA558LA, features longer runways than the QUADRA522LA, it allows working on vehicles with longer wheelbases.
The integrated auxiliary wheel-free offers adjustable lifting platforms – with front and rear extensions – to fit every vehicles.
Options / Accessories
As the QUADRA552LA, the QUADRA558LA also features a perfect finish. Hoses and wires from command unit to the runways, are routed into a plastic articulated chain providing also better reliability.
The QUADRA558LA, features longer runways than the QUADRA522LA, it allows working on vehicles with longer wheelbases.
The integrated auxiliary wheel-free offers adjustable lifting platforms – with front and rear extensions – to fit every vehicles.
Size (in mm) :
Parcel Nr.1 : 5850 x 740 x 850 mm
Parcel Nr.2 : 1300 X 580 X 200 mm
Weight (en kg):
Parcel Nr.1 : 2343 kg
Parcel Nr.2 : 96 kg
| TECHNICAL DATA | QUADRA558LA |
|---|---|
| Main lift capacity | 5,0 t |
| Auxiliary lift capacity | 4,0 t |
| Integrated equipment for wheel alignment | yes |
| Net weight | 2400 kg |
| Lifting/lowering time (main lift) | 60/55 sec. |
| Lifting/lowering time (auxiliary lift) | 25/20 sec. |
| Nominal hydraulic pressure | 180 bars |
| Power supply | 400 V / 3 ph / 50 =hz / 16 A / 2,2 kW |
Similar equipment
2,0 T jacking beams without running wheels
Universal and indispensable solution for jacking under axle.
This jacking beams 2,0 T is designated to run between the two platforms of the lift, or in a pit, to be positioned exactly under the vehicle’s axle to be raised.
The lifting movement is done by an hydraulic lifting cylinder, with oil pressure created by an air-hydraulic motor integrated in the jacking beam. The jacking beam is only air supplied (no power), and features safety latching and savety overloading devices. The lowering movement requires two hands for safety reason, with a “hold to run” command.
2,6 T jacking beam without running wheels
Universal and indispensable solution for jacking under axle.
This jacking beams 2,6 T is designated to run between the two platforms of the lift, or in a pit, to be positioned exactly under the vehicle’s axle to be raised.
The lifting movement is done by an hydraulic lifting cylinder, with oil pressure created by an air-hydraulic motor integrated in the jacking beam. The jacking beam is only air supplied (no power), and features safety latching and savety overloading devices. The lowering movement requires two hands for safety reason, with a “hold to run” command.
Double scissor low profile lift 3,0 T
This electro-hydraulic wheel free lift, features a lifting height of 1900 mm, providing optimal access to the vehicle underbody for repair or service works.
Set 8 universal adaptators
Compatible with vehicle lifting 4619316
Set, 8 universal adaptors, with oblong fixing hole for continuous and accurate position adjustment. The adaptor gets quickly and safely clamped onto the lifting platform, thanks to its thumb screw, to be hand tightened thumb screw.
Lifting table – 1200 kg
This lifting table has been especially designed to easily and safely remove and install heavy batteries from electric vehicles, in conjunction with the use of a 2-post lift such as the Azur42AH.
Photocell for installation under low ceiling
Compatible with 2-post lifts AZUR35CH, AZUR42CH, AZUR50CH and AZUR50WH