Lateral mobile station
This semi-trailer mobile station is equipped with a side drive-by platform. It was designed to adapt to reduced work spaces. It only needs 6 meters of width to deploy the side ramp. It is able to perform inspections on light and heavy duty vehicles.
It is towed by a truck and can be left on the area, it does not require the towing vehicle during the inspection phase. Like all our mobile stations, it is equipped with a generator, thus it is completely autonomous.
Main power supply, generator : 80 KVA
Side slip tester
Roller brake tester
Suspension tester
Axle play detectors
Camera assembly for visual inspection
Taximeter with automatic coverplate
This semi-trailer mobile station is equipped with a side drive-by platform. It was designed to adapt to reduced work spaces. It only needs 6 meters of width to deploy the side ramp. It is able to perform inspections on light and heavy duty vehicles.
It is towed by a truck and can be left on the area, it does not require the towing vehicle during the inspection phase. Like all our mobile stations, it is equipped with a generator, thus it is completely autonomous.
Size (in mm) :
Parcel Nr.1 (on road) : 12500 x 2550 x 4100 mm
Parcel Nr.2 (at work) : 12500 x 5900 x 4100 mm
Weight (en kg):
Parcel Nr.1 : 33000 kg
| BASIC EQUIPMENT | 3W | LV | HV |
|---|---|---|---|
| Main power supply / Generator 80 KVA up to 110 KVA | ✓ | ✓ | |
| Roller brake tester | ✓ | ✓ | |
| Side slip tester | ✓ | ✓ | |
| Axle play detectors | ✓ | ✓ | |
| Camera assembly for visual inspection | ✓ | ✓ | |
| PC tablet repeater | ✓ | ✓ | |
| Suspension tester | ✓ | ||
| Repeater screen | ✓ | ✓ |
| OPTIONAL EQUIPMENT | 3W | LV | HV |
|---|---|---|---|
| Headlight tester | ✓ | ✓ | ✓ |
| Exhaust emission tester | ✓ | ✓ | ✓ |
| Speedometer tester | ✓ | ✓ |
2,0 T jacking beams without running wheels
Universal and indispensable solution for jacking under axle.
This jacking beams 2,0 T is designated to run between the two platforms of the lift, or in a pit, to be positioned exactly under the vehicle’s axle to be raised.
The lifting movement is done by an hydraulic lifting cylinder, with oil pressure created by an air-hydraulic motor integrated in the jacking beam. The jacking beam is only air supplied (no power), and features safety latching and savety overloading devices. The lowering movement requires two hands for safety reason, with a “hold to run” command.
2,6 T jacking beam without running wheels
Universal and indispensable solution for jacking under axle.
This jacking beams 2,6 T is designated to run between the two platforms of the lift, or in a pit, to be positioned exactly under the vehicle’s axle to be raised.
The lifting movement is done by an hydraulic lifting cylinder, with oil pressure created by an air-hydraulic motor integrated in the jacking beam. The jacking beam is only air supplied (no power), and features safety latching and savety overloading devices. The lowering movement requires two hands for safety reason, with a “hold to run” command.
Set of long drive-in/out, with oil hoses covers, for above ground installation of lift (without pit)
Compatible with the double lifting platform for 2, 3 and 4 wheelers vehicles (category L) : AGILA234EH
Double lifting platform, for 2, 3, 4 wheelers for vehicle inspection – Vehicle category L
This double scissor lifting platform, meets the requirements for vehicle inspection of vehicles.
One advantage of this double platform lift is provided by the fact it can accommodate the full range of vehicles (2, 3 and 4 wheelers such as motorcycles, side-cars, quads…).
Its innovative design offers a full access to the vehicle all around the lift, whichever type of vehicle has been raised.
Motorcycle lift for vehicle inspection – Vehicle categories L1, L3
Ultimate lifting solution to cover any requirement in vehicle inspection (european category L).
This lift features an electro-hydraulic drive system, with power pack located in themobile command unit, providing smooth,silent, and quick working operations (raising time : 30 seconds).
The space saving configuration allows perfect access all around the lift to the vehicle, with the possibility for the inspector to stand verynear to raised vehicle. This specification is ideal for vehicle inspection activities.
