Technical inspection

Mobile station container

Réf. OMEGA150

This container-type station is designed for the inspection of light and heavy vehicles. Transported by a heavy-duty container carrier, it can be placed on the work area and does not require the transport vehicle to be mobilized.

Lateral mobile station

Réf. SIGMA330

This semi-trailer mobile station is equipped with a side drive-by platform. It was designed to adapt to reduced work spaces. It only needs 6 meters of width to deploy the side ramp. It is able to perform inspections on light and heavy duty vehicles.
It is towed by a truck and can be left on the area, it does not require the towing vehicle during the inspection phase. Like all our mobile stations, it is equipped with a generator, thus it is completely autonomous.

Transverse mobile station

Réf. OMEGA330

This sem-trailer cross-pass station is designed for the technical inspection of light vehicles and heavy goods vehicles. Conveyed by a tractor, it can be placed on the work area and does not require the mobilization of the transport vehicle.

2,0 T jacking beams without running wheels

Réf. 4207420

Universal and indispensable solution for jacking under axle.
This jacking beams 2,0 T is designated to run between the two platforms of the lift, or in a pit, to be positioned exactly under the vehicle’s axle to be raised.
The lifting movement is done by an hydraulic lifting cylinder, with oil pressure created by an air-hydraulic motor integrated in the jacking beam. The jacking beam is only air supplied (no power), and features safety latching and savety overloading devices. The lowering movement requires two hands for safety reason, with a “hold to run” command.

2,6 T jacking beam without running wheels

Réf. 4207520

Universal and indispensable solution for jacking under axle.
This jacking beams 2,6 T is designated to run between the two platforms of the lift, or in a pit, to be positioned exactly under the vehicle’s axle to be raised.
The lifting movement is done by an hydraulic lifting cylinder, with oil pressure created by an air-hydraulic motor integrated in the jacking beam. The jacking beam is only air supplied (no power), and features safety latching and savety overloading devices. The lowering movement requires two hands for safety reason, with a “hold to run” command.