2D and virtual sonar wheel balancer
– LED display
– Compact chassis
– Protective cover
– Virtual sonar
– Electromagnetic brake
– Automatic detection of balance planes
Quick clamping kit GL40
3 cones kit 45 – 110 mm
Mass clamp
Calibration mass
– LED display
– Compact chassis
– Protective cover
– Virtual sonar
– Electromagnetic brake
– Automatic detection of balance planes
Size (in mm) :
Weight (en kg):
| TECHNICAL DATA | MEQ440L |
|---|---|
| Balancing speed | 100 tr/min |
| Measuring cycle | 4,7 s |
| Measurement uncertainty | 0,5 g |
| Resolution | 1 g |
| Noise level | <70 +/- 3dB (A) |
| Rim width setting range | 40 – 510 mm |
| Rim diameter setting range | 265 – 765 mm |
| Maximum width of the wheel | 508 mm |
| Maximum diameter of the wheel | 1118 mm |
| Max wheel weight | <75 kg |
| Net weight | 110 kg |
| Power supply | 230V / 50-60Hz |
2,0 T jacking beams without running wheels
Universal and indispensable solution for jacking under axle.
This jacking beams 2,0 T is designated to run between the two platforms of the lift, or in a pit, to be positioned exactly under the vehicle’s axle to be raised.
The lifting movement is done by an hydraulic lifting cylinder, with oil pressure created by an air-hydraulic motor integrated in the jacking beam. The jacking beam is only air supplied (no power), and features safety latching and savety overloading devices. The lowering movement requires two hands for safety reason, with a “hold to run” command.
2,6 T jacking beam without running wheels
Universal and indispensable solution for jacking under axle.
This jacking beams 2,6 T is designated to run between the two platforms of the lift, or in a pit, to be positioned exactly under the vehicle’s axle to be raised.
The lifting movement is done by an hydraulic lifting cylinder, with oil pressure created by an air-hydraulic motor integrated in the jacking beam. The jacking beam is only air supplied (no power), and features safety latching and savety overloading devices. The lowering movement requires two hands for safety reason, with a “hold to run” command.
Double scissor low profile lift 3,0 T
This electro-hydraulic wheel free lift, features a lifting height of 1900 mm, providing optimal access to the vehicle underbody for repair or service works.
Set 8 universal adaptators
Compatible with vehicle lifting 4619316
Set, 8 universal adaptors, with oblong fixing hole for continuous and accurate position adjustment. The adaptor gets quickly and safely clamped onto the lifting platform, thanks to its thumb screw, to be hand tightened thumb screw.
Lifting table – 1200 kg
This lifting table has been especially designed to easily and safely remove and install heavy batteries from electric vehicles, in conjunction with the use of a 2-post lift such as the Azur42AH.
Photocell for installation under low ceiling
Compatible with 2-post lifts AZUR35CH, AZUR42CH, AZUR50CH and AZUR50WH